Colortrac Large Format Scanner Overview

Technical specifications

SmartLF scanners		Cx 40	Ci 40	Gx
				25	42
Upgradeable m, c and e models
Max image width		40" 101.6 cm E size+ A0+	40" 101.6 cm E size+ A0+	25" 63.5 cm D size+ A1+	42" 106.7 cm E size+ A0+
Max media width		44" 111.8 cm	42" 106.7 cm	35" 88.9 cm	48" 121.9 cm
Max image length		unlimited by scanner	unlimited by scanner	unlimited by scanner
Max media thickness	Standard model	0.08" 2 mm	0.012" 0.3 mm (270 gsm)	0.08" 2 mm
	T (Thick) model	N/A	N/A	0.8" 20 mm
Mono scan speed at 200 dpi (in / sec) (1)		9.00	10.00	6.00
Color scan speed at 200 dpi (in /sec) (1)	m model	N/A	N/A	N/A
	c model	0.75	0.83	0.75
	e model	3.00	3.33	3.00
Scan accuracy (2)		+/-0.1% +/-1 pixel	+/-0.1% +/-1 pixel	+/-0.1% +/-1 pixel
Optical resolution (dpi)		600	600	1200 x 600
Interpolated resolution (dpi) (3)		3600	9600	9600
Grayscale capture		16-bit	16-bit	16-bit
Color capture		48-bit	48-bit	48-bit
Color space		RAW RGB	sRGB	RAW RGB
Dimensions (w x h x d)		54.8 x 6.7 x 13.0" 140 x 17 x 33 cm	48.5 x 8 x 10.6" 123.2 x 20.1 x 27 cm	44.9 x 6.7 x 14.4" 114 x 17 x 37 cm	56.7 x 6.7 x 14.4" 144 x 17 x 37 cm
Weight		73 lbs 33 kg	49 lbs 22 kg	84 lbs 38 kg	102 lbs 46 kg
Instant on
Paper load		face-down	face-up	face-down
Paper justification		side	side / center	side / center
Paper entry and exit		front entry rear exit	front entry front exit	front entry rear exit
Transport system		2+4 wheel drive APT	ASRPT	2+3 wheel drive APT
Imaging system		5 x CIS	5 x CIS	3 x quadri-linear CCDs	5 x quadri-linear CCDs
Illumination		instant-on RGB LED	instant-on 2D RGB LED	fluorescent tubes
Connectivity		USB2	USB2 Gigabit Ethernet	USB2
Network ready
ENERGY STAR® qualified
Power supply		internal	external	internal

Included software

SmartLF scanners		Cx 40	Ci 40	Gx
				25	42
WIA / STI interface (4)
SmartLF All in One scan to file and scan to copy software with support for TIFF, JPG, PNG and PDF file formats
Utility software

Optional software

SmartLF scanners		Cx 40	Ci 40	Gx
				25	42
ScanWorks scan to file software
CopySmart scan to copy software
ISIS Driver

Optional accessories

SmartLF scanners		Cx 40	Ci 40	Gx
				25	42
Floor stand
Paper catch basket for floor stand
PC and flat screen mounting kit for floor stand
Universal Repro Stand

Recommended for ...

SmartLF scanners		Cx 40	Ci 40	Gx
				25	42
Document type
Technical documents
Maps and GIS
Artwork or photos
Document color
Monochrome	m model
	c model
	e model
Color	m model
	c model
	e model
Color-critical	m model
	c model
	e model
Document condition
Delicate
Dirty
Folded
Document volume
High volume	m model
	c model
	e model
Low volume	m model
	c model
	e model
Application
Scanning to file
Copying
EDM

System requirements

(1) The scan rate is proportional across the full range of resolutions supported by the scanner. Actual scan times will depend on the host system performance. Quoted top speeds may be limited by the effective bandwidth of the USB2 or Ethernet and are not guaranteed for all media types.

(2) The achieved scan accuracy may vary depending on the operating environment and the type and thickness of media. Colortrac measures accuracy by scanning a paper original printed with a square target. The pixel co-ordinates of the target image are measured and compared with the known dimensions of the original. SmartLF Ci 40 scanners are tested at 20°C +/- 3°C, 60% +/- 10% RH non-condensing.

(3) The maximum resolution and size selectable for an image is limited by the file format specified, the available disk space and the computer operating system.

(4) Microsoft WIA / STI is specified for the USB interface only.